Performance Data
AMSOIL SAE 50 (CTL) Synthetic
Powershift Transmission Fluid is Recommended
for Applications Requiring the Following Specifications:
- Caterpillar TO-4
- Twin Disc
- Komatsu T-50
- Allison C-4
- Rockwell/Eaton/Fuller CD-50 (PS-081)
- ZF TE-ML 01
- API GL-1
Applications
- Dozers
- Semi-trucks manual transmissions
- Wheel loaders and crawlers
- Back hoe loaders
- Cranes
- Off-road fork trucks
- Harbor handling equipment
- Railway equipment
- Mining equipment
- Road graders
- Commercial boats
AMSOIL Synthetic SAE 50 Powershift Transmission
Fluid is formulated for Fuller CD-50 performance and is
ideal for use in Rockwell/Eaton/Fuller, Spicer, Fabco,
Warner and other large truck manual transmissions.
AMSOIL Synthetic SAE 50 Powershift
Transmission Fluids can be used in Caterpillar, Allison, Komatsu, Clark, Hurth, Borg-Warner, Twin Disc, Voith,
ZF, Funk and Brockhouse powershift-type transmissions
and Eaton/Rockwell/Fuller transmissions.
Installation
AMSOIL Synthetic Powershift Transmission Fluids are
fully compatible with other TO-4 fluids used in powershift
applications. To install AMSOIL Synthetic Powershift
Transmission Fluids, drain the fluid in the system, replace
the filter (if so equipped) and install the appropriate
Powershift Transmission Fluid.
Service Life
AMSOIL Synthetic Powershift Transmission Fluids provide
extended service life beyond conventional petroleum
fluids if Synthetic Powershift Transmission Fluids are kept
free of dirt and moisture. Oil analysis is recommended
if extending service intervals beyond equipment manufacturer
recommendations.
AMSOIL Synthetic Powershift Transmission Fluids
may be used for 250,000 miles or two years (whichever
comes first) in CD-50 manual transmission applications.
AMSOIL
Limited Warranty
| Typical Technical Properties
|
| AMSOIL
SAE 50 Synthetic Powershift Transmission
Fluid (CTL) |
| SAE
Viscosity Grade |
50 |
| ISO
Viscosity Grade |
150 |
| Kinematic Viscosity
@ 100° C, cSt (ASTM D-445) |
18.3 |
| Kinematic Viscosity
@ 40° C, cSt (ASTM D-445) |
159.0 |
| Viscosity Index
(ASTM D-2270) |
128 |
| Flash Point
°C (°F) (ASTM D-92) |
268
(514) |
| Fire Point
°C (°F) (ASTM D-92) |
292
(558) |
| Pour Point
°C (°F) (ASTM D-97) |
-36
(-33) |
| Four Ball Wear
Test 40 kg. 75°C, 1200 rpm, 1 hour (ASTM
D-4172 B) |
0.35 |
| Noack 250°C,
1 hour, percent weight loss (DIN 51581) |
3.5 |
| (Also
see SAE 10W and SAE 30 Powershift Transmission Fluid) |